推进技术 ›› 2020, Vol. 41 ›› Issue (1): 194-204.DOI: 10.13675/j.cnki. tjjs. 190163

• 电推进 • 上一篇    下一篇

磁场对霍尔推力器放电特性及性能参数影响的粒子模拟研究

段萍1,宋继磊1,姜博瑞1,陈龙1,李文庆1,胡翔2,刘广睿1   

  1. 1.大连海事大学 理学院,辽宁 大连 116026;2.中国特种飞行器研究所,湖北 荆门;448035
  • 出版日期:2020-01-20 发布日期:2020-01-20
  • 作者简介:段 萍,博士,教授,博导,研究领域为低温等离子理论与数值模拟。E-mail:duanping@dlmu.edu.cn
  • 基金资助:
    国家自然科学基金(11275034;11605021;11375039;11975062);辽宁省自然科学基金(201601074);中国博士后科学基金(2017M621120);中央高校基本科研业务费专项资金(3132018234)。

Particle-in-Cell Simulation on Effects of Magnetic Field onDischarge Characteristics and Performance of Hall Thruster

  1. 1.School of Science,Dalian Maritime University,Dalian 116026,China;2.AVIC Special Vehicle Research Institute,Jingmen 448035,China
  • Online:2020-01-20 Published:2020-01-20

摘要: 磁场强度及位形对霍尔推力器放电过程有显著影响。根据霍尔推力器通道尺寸和等离子体放电过程建立二维物理模型,采用粒子模拟方法,研究了不同磁场强度及位形等离子体放电特性,讨论了推力、推功比及放电电流的变化规律。模拟表明:当中轴线磁场强度峰值小于200G时,磁场对电子轴向传导约束减弱;当磁场强度峰值在200G~420G时,电子温度、电离率及电子与壁面碰撞频率降低,出口处离子径向速度增大,壁面腐蚀增加;当磁场强度峰值为280G时,加速区最短,放电电流最小。不同零磁点磁场位形会改变通道电离区和加速区位置,影响推力器放电性能。

关键词: 霍尔推力器;磁场强度;磁场位形;放电特性;粒子模拟

Abstract: The magnetic field intensity and configuration have significant influence on the discharge process of Hall thruster. In this work, a two-dimensional physical model based on the channel size of Hall thruster and the physical process of plasma discharge is established. The PIC simulation method is adopted to study the discharge characteristics of plasma with different magnetic field distributions, and to discuss the variation of thrust, thrust to power ratio and discharge current. The simulation results show that the peak magnetic field intensity of the central axis is less than 200G. The restraint of the magnetic field on the electron conduction on the axial direction decreases. When the peak magnetic field intensity is between 200G~420G, the electron temperature, ionization rate and the collision frequency between electrons and the wall decrease, the radial velocity of ions at the outlet increases, and the wall corrosion increases. When the peak magnetic field intensity is 280G, the length of acceleration region become minimal and the value of discharge current drop to a minimum. Magnetic field configurations with different zero magnetic point will change the position of ionization and acceleration zones in the channel and affect the discharge performance of the thruster.

Key words: Hall thruster;Magnetic field intensify;Magnetic field configuration;Discharge characteristics;Particle-in-cell